PSI Nevada C-14A Reinforcing Steel Certification Package
Mandatory Nevada Contractor Management Survey
the exam consists of 30 question and you get 1 hour to complete the test. the minimum passing score is a 21.
To be certified The Nevada Contractor Management Survey exam must be taken as well.
The Nevada State Contractors Board has approved the Examination Content Outlines. The outlines reflect the minimum knowledge required by contractors to perform their duties to the public in a competent and responsible manner. Changes in the content of the examinations will not be made until changes are made in the reference books.
The examination questions reference specific national codes. However when practicing as a contractor you must check with each local jurisdiction to ensure compliance with additional regulations or modifications adopted by that jurisdiction.
If there is conflicting information between a code, law, or regulation and another authorized reference text, please be aware that the requirements of the code, law, or regulation prevail, and that the examination questions will be referenced to the code, law, or regulation.
The examination may include questions on:
Reading and interpreting construction codes and regulations.
Nevada Health department regulations.
Appropriate building codes.
Trade materials, tools, equipment and methods.
Nevada Occupational Safety and Health Rules.
Scope of Work
The fabrication, placement and tying of steel reinforcing bars (rods), and post-tensioning to reinforce concrete buildings and structures.
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is CLOSED BOOK.
The following reference materials are not allowed in the examination center:
Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
Placing Reinforcing Bars, Recommended Practices, 2011, 9 th Edition
Technical Digest No. 9 – Handling and Erection of Steel Joists and Joist Girders, 3rd Edition, 2008,
CRSI Manual of Standard Practice 2009
SDI Manual of Construction with Steel Deck, 2006, 2nd Edition,
|title=Mandatory Nevada Contractor Management Survey|psi-nevada-contractor-management-survey-certification-package|title=Reference Materials|osha-construction-standards-regulations-29-cfr-1926|placing-reinforcing-bars-9th-edition|training-certification-of-field-personnel-for-unbonded-post-tensioning|crsi-manual-of-standard-practice-28th-edition|title=Application Assistance|application-service|